Lifetime 8x7.5 ft Plastic Outdoor Storage Shed Kit (6411)

Lifetime 8x7.5 ft Plastic Outdoor Storage Shed Kit (6411)

Get your act together with this great-looking 8 x 7.5 ft plastic garden shed. This attractive plastic garden shed is large enough to store your lawnmower and large garden equipment and also comes with shelving and a pegboard to organize your smaller tools and supplies. With a Lifetime plastic garden shed, you’ll never lose your favorite garden spade again! You’ll appreciate the No Painting, No Rusting design of Lifetime’s plastic garden sheds. Our plastic garden sheds are UV-protected to resist fading and cracking, so they’ll look good as new for many years to come. Constructed from high-density polyethylene plastic with steel reinforcements, they’re built to weather the storms. Lifetime’s plastic garden sheds are a stylish solution to your storage problems. Made in the USA. Covered by a 10 yr. limited factory warranty in US and Canada. Compatible with the 8 ft expansion kits.

Consult local building codes before assembly. This shed must be built on a flat level foundation of wood or concrete (not included). It is designed with a slight indentation in each corner of the floor so that you can drill through the flooring to secure it to the foundation. Anchoring hardware depends on the type of foundation you have and is therefore not included in the shed kit. Not including the installation of the foundation, you can expect assembly of the shed itself to take 2 adults up to 6 hours.

Features:

• *Minimum High-Velocity Wind Rating in Florida is 15 psf. When paired with the Lifetime Wind Kit, Lifetime Sheds meet a wind rating of 20 psf (~118 mph).
• Attractive Appearance and Design
• Customizable Shelving and Storage System
• Dade County Certification for Lifetime Sheds: https://bit.ly/2zwb010
• Dual-Wall High-Density Polyethylene (HDPE) Construction
• Heavy-Duty Steel Trusses Provide Additional Roof Strength
• High-Pitched Roof Allows for Quick Drainage of Rain and Snow
• Lifetime NOA Number: 17-0426.06
• Lockable Steel-Reinforced Doors for Added Security
• Low Maintenance Design
• Slip-Resistant High-Density Polyethylene (HDPE) Floor Protects Against Oil, Solvents, and Stains
• Sturdy Steel-Reinforced Construction
• UV Protected to Prevent Weather Damage

Features & Benefits:
Attractive Exterior
UV-protected to help prevent fading and cracking. Stain-resistant exterior never needs painting.
High-Density Polyethylene (HDPE) Floor
Oil, stain and slip-resistant floor surface does not crack, chip, or peel.
High-Pitched Roof
Steep angle allows for quick drainage of rain and snow, and provides a spacious walk-around interior. Heavy-duty steel trusses increase strength.
Lockable Doors
Steel-reinforced doors provide an extra-large opening, sturdy structure, and exterior padlock loop.
Screened Vents
Provide airflow and keep pests out.
Shelving System
Steel Reinforced, customizable, and adds additional storage space.
Steel-Reinforced Walls
Designed with dual-wall high-density polyethylene (HDPE) panels with steel wall supports for added strength.

Specifications:
Assembly: Secure-Fastened Assembly with High-Grade Metal Screws
Cubic Feet: 362.0 ft3 (10,25 m3)
Door Handle: High-Impact Handles with Metal Latch
Door Hinges: Full-Length Galvanized Steel Hinge Pins
Door Locking: Exterior Padlock Loop with Two (2) Deadbolts on Interior of Left Door
Door Opening Dimensions: 58.3 in. W x 75.4 in. H (148 cm x 191,5 cm)
Door Structure: Steel-Reinforced Polyethylene
Eave Depth: 2 in. (5,08 cm)
Exterior Dimensions: 92 in. W x 86 in. D x 96 in. H (2,33 x 2,18 x 2,43 m)
Exterior Roof Dimensions: 95.2 in. W x 89 in. D (2,42 m x 2,27 m)
Fascia Height: 1.25 in. (3,1 cm)
Floor Structure: Slip-Resistant Dual-Wall Polyethylene
Footprint: 93.7 in. W x 88 in. D (2,38 m x 2,23 m)
Interior Dimensions: 90 in. W x 84 in. D x 70 in. - 94 in. H (2,28 x 2,13 x 1,77 - 2,38 m)
Interior Headroom (truss to floor): 80 in. (2,032 m)
Materials of Construction: Powder-Coated Steel and High-Density Polyethylene
Max Roof Load: 23 psf
Nominal Dimensions: 8 ft. x 7.5 ft. (2,43 m x 2,28 m)
Peg Strips: Two (2) 16 in. Peg Strips with Metal Hooks
Roof Pitch: 6:12
Roof Structure: Dual-Wall Polyethylene Panels
Roof Support Trusses: Two (2) Steel A-Frame Trusses
Screened Vents: Two (2) Screened Vents
Shed Wind Rating w/out Extreme Weather Kit: 65 mi/hr
Shelves: Five (5) Shelves - Including Two (2) 9.5 in. radius Corner Shelves, Two (2) 30 in. W x 10 in. D Rear Shelves, and One (1) 90 in. W x 9 in. D Rear Shelf
Square Feet: 52.5 ft2 (4,87 m2)
Wall Structure: Steel-Reinforced Dual-Wall Polyethylene Panels
Windows: One (1) 16.5 in. W x 16.5 in. H Polycarbonate Window – Opens Half-Way
Packaged Dimensions: Box 1 is 95.313"L (242.095cm) x 32"W (81.28cm) x 9.75"H (24.765cm), 230 lbs (104.326kg), Box 2 is 95.312"L (242.092cm) x 32"W (81.28cm) x 10.125"H (25.718cm), 165 lbs (74.843kg)